Hi everyone. Stoked to find this site after watching the video on YouTube with the crazy cool setup that Triple Bogey has created. Question, I am putting in a simulator in my garage. Dimension are 10 feet wide by 16 feet long with 10 foot ceilings. I purchased the Uneekor EYE X02 and the BenQ AK700ST, and purchased a custom screen from The SportsScreen.com. I'll be mounting the Uneekor and the BenQ to the ceiling. For the sake of giving the electrician my needs, would you install receptacles in the ceiling for plugging in the devices and running cable - HDMI/Ethernet through them, or would just just fish the cables through the ceiling and to the the computer and power source near the computer in order to have a cleaner look of no actual receptacles on the ceiling? Just trying to figure out what would be better both from a logistics standpoint as well as the cleanest possible look. Thanks in advance for your help. Justin
In my experience, the more outlets the better. However, I like to keep my projector and computer on a decent battery backup. Placement for the backup can be tricky if you are using the outlets on the ceiling. Conduit is also nice like trpl_bgy says. I have filled up my conduit already:). Enjoy your sim!
Welcome!! With a ten foot wide room have you done at least a rough calculation as to how far offset you’ll need hit from to swing comfortably? I think you could still put outlets in the middle and I would consider putting the outlet in between where the xo2 and the projector will go. That would give some to plug in a spot/track light unless you’re going to mount one. But then the offset comes into
Def add power outlets to ceiling for a few different things:
1. Projector
2. Floor Projector
3. Overhead Launch Monitor
4. Pin or Spotlight
This keeps it clean. Also run a 3” Conduit with 2 HDMI’s and 2 Ethernet options from PC to Cieling. So through the wall/ceiling from PC to Projector Power. Also run conduit with HDMI from PC to any TV’s or Displays you may want on walls.
Last, consid